双色球跨度走势图500

The stainless steel cooling tower manufacturer explains the cooling tower's cooling process.

2020-05-26 Come from: Changzhou Jiang Fan Cooling Tower Co., Ltd. Browse times: 45


In fact, it is a heat sink, so that the cooling water needs to be cooled down by the evaporative cooling of the water. In order to make full use of water resources, reduce the load of urban water supply network and reduce operating costs, the cooling water used in condenser of air conditioning and refrigeration system is treated by cooling tower and recycled. The cooling tower uses natural ventilation or mechanical ventilation to cool the spray hot water.

In the purification system of gas station, the cooling tower is widely used. After spraying the water in the vertical tube and washing tower, the temperature increases and the impurity content increases. The large part of the sundries is precipitated by the sedimentation tank. The relatively clear hot water is pumped to the top part of the cooling tower by the water pump. The nozzle is uniformly sprayed to the packing layer and contacted with the downward moving air. As a result, the water temperature is reduced, the water is uniformly sprayed on the packing layer, or a uniform water film is formed on the surface of the packing, thus increasing the contact surface between water and air and prolonging the contact time, which is the mass transfer and transmission in the cooling tower. Heat creates good conditions.

There are two ways of air flow. One is the uniform distribution of intake air by the inlet of the cooling tower and the natural pumping force generated by the air duct to suck the air from the bottom up. The other method is to install the fan to make the air flow. This is natural ventilation and mechanical ventilation cooling tower. After mass transfer and heat transfer, the air temperature increases and the water content increases, and the air is discharged into the atmosphere near the top of the tower. As a result, some of the water evaporates, absorbs latent heat of vaporization, reduces temperature, and at the same time, air and water contact to cool the water, both of which make the circulating water temperature drop. The cooled water flows into the sump, then flows into the cold water well and is then pumped to the standpipe and the washing tower to form a circulating water system.

Key word: Stainless steel cooling tower manufacturers            

Changzhou Jiang Fan Cooling Tower Co., Ltd. - industrial cooling tower, stainless steel cooling tower, FRP cooling tower, long sale to Shaanxi, Xi'an, Jiangsu, Xuzhou, Ningxia, Changchun, Fujian, Inner Mongolia, Wuhan, Wuhan,

National toll free service hotline: 400-928-0708

Head Office Tel: 0519-87610988, 0519-87610999

Mobile phone: 13585425786 Mr. 13519167906 Jiang

No. 32048102000308, Su Gong net.

Copyright CopyRight: All Rights Reserved. Changzhou Jiang Fan Cooling Tower Co., Ltd. Technical support: Phoenix Network Website map XML Record number: Su ICP prepare No. 17050440 -2


Scan the mobile terminal
北斗棋牌全部版本 567彩票 下载 双色球投注金额计算表360 5933cc彩票在线 下载星云娱乐斗地主 kg彩票如何选好 乐彩3d论坛手机17500 乐彩网17500双色球出球顺序 3d172前后关系 中彩网投注为什么不花钱